26 jobs found

Part time; temporary. Apprenticeships are also available. Perfect for someone in school or still trying to decide on career or college. Typical skill sets, physical, acquired, mental and personal attributes, organizational and teamwork will be most beneficial on our team. For a more detailed list of Skill Sets required in this field, please contact our office and we will send you a sheet. Our office is located in North Macomb County, but we service parts of other counties such as Oakland, Lapeer, St. Clair and Wayne. Must pass pre-employment and random drug/alcohol screening and maintain A+ driving record.

Full time, licensed Journeyman Plumber with current ASSE certification. Full service plumbing contractor located in North Macomb County but providing immediate service to Oakland, Lapeer, St. Clair and Wayne counties. Typical skill sets, physical, acquired, mental and personal attributes, organizational and team work will be most beneficial on our team. Must pass pre-employment and random drug/alcohol screening and maintain A+ driving record. We offer flexible schedules, paid vacations, medical insurance and retirement benefits.

Full time Journeyman Plumber with service experience. Must include drain cleaning, fixture installation, new construction, water heater diagnostics, sales and service, including tankless water heaters. Must pass pre-employment and random drug/alcohol screening and maintain A+ driving record. We offer flex schedules, paid vacations, medical insurance and retirement benefits.

Mechanics perform repairs and preventive maintenance on large trucks. The preventive maintenance and repair may involve assembly, disassembly, and/or repair of lubrication systems, cooling systems, electrical systems, hydraulic systems, brakes, suspension systems and exhaust systems. Inspect brake systems, steering mechanisms, wheel bearings and other important parts to ensure that they are in proper operating condition Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery Adjust and reline brakes, align wheels, tighten bolts and screws and reassemble equipment Raise trucks or equipment using hydraulic jacks or hoists Test drive trucks to diagnose malfunctions or to ensure that they are working properly Inspect, test and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, charts and pressure gauges Examine and adjust protective guards, loose bolts and specified safety devices Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications Specialize in repairing and maintaining parts of the engine May drive forklift or other powered industrial truck May lift a tire and a rim onto mounting mechanism to mount tire onto rim Second shift 4:00pm start $65,000- $75,000 annually depending on experience $3,000 sign on bonus if able to provide B level certification (ASE T-4 Brakes & T-6 Electrical & Electronics)   Job Requirements: Knowledge of DOT, OSHA and other related state and federal regulations Ability to communicate effectively across various levels of the organization, and communicate with customers and external vendors Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions, schematic diagrams and procedural manuals Must meet all regulatory requirements to operate trucks and other equipment used HS Diploma or GED Two years of vehicle/hydraulic maintenance or welding experience demonstrating progressive levels of skill attained Ability to use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, precision instruments. Ability to use power tools such as pneumatic wrenches, lathes, welding equipment and jacks, torch and hoists Must wear prescribed protective clothing & equipment used: Steel-toe boots, gloves, goggles, ear plugs and overalls Experienced in heavy diesel repair; have or the ability to obtain a CDL Class B license Have certification or the ability to be certified to operate forklift Job Type: Full-time

Mechanics perform repairs and preventive maintenance on large trucks. The preventive maintenance and repair may involve assembly, disassembly, and/or repair of lubrication systems, cooling systems, electrical systems, hydraulic systems, brakes, suspension systems and exhaust systems. Inspect brake systems, steering mechanisms, wheel bearings and other important parts to ensure that they are in proper operating condition Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery Adjust and reline brakes, align wheels, tighten bolts and screws and reassemble equipment Raise trucks or equipment using hydraulic jacks or hoists Test drive trucks to diagnose malfunctions or to ensure that they are working properly Inspect, test and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, charts and pressure gauges Examine and adjust protective guards, loose bolts and specified safety devices Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications Specialize in repairing and maintaining parts of the engine May drive forklift or other powered industrial truck May lift a tire and a rim onto mounting mechanism to mount tire onto rim Second shift 4:00pm start $70,000- $100,000 annually depending on experience $7,500 sign on bonus if able to provide A level certification (ASE Master Truck Mechanic)   Job Requirements: Knowledge of DOT, OSHA and other related state and federal regulations Ability to communicate effectively across various levels of the organization, and communicate with customers and external vendors Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions, schematic diagrams and procedural manuals Must meet all regulatory requirements to operate trucks and other equipment used HS Diploma or GED Two years of vehicle/hydraulic maintenance or welding experience demonstrating progressive levels of skill attained Ability to use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, precision instruments. Ability to use power tools such as pneumatic wrenches, lathes, welding equipment and jacks, torch and hoists Must wear prescribed protective clothing & equipment used: Steel-toe boots, gloves, goggles, ear plugs and overalls Experienced in heavy diesel repair; have or the ability to obtain a CDL Class B license Have certification or the ability to be certified to operate forklift Job Type: Full-time

General laborer duties  - General laborer duties include: unpacking/packing, scanning, sorting and stacking automotive parts.  — Must be able to stand for 8-9 hours per day, bend, lift and twist repeatedly — Must be able to lift up to 50 lbs — Reliable transportation required (Buses are running nearby and a schedule can be provided) — Benefits, PTO, Vacation Holiday -   available Current Work Schedule 1st Shift     6am – 3:30pm   Mon – Fri (Possible “mandatory” Sat & Sun 6am – 3:30pm) 2nd Shift     3:45pm – 1:15am   Mon – Fri (Possible “mandatory” Sat & Sun 3:45pm – 1:15am) 3rd Shift New Hires will train on 2nd shift until 3/31 and will start 3rd shift on 4/1/2019. Employees hired on 3rd shift MUST continue to work on 3rd shift starting April 1st, 2019. Work Schedule Effect April 1st 1st Shift       6am – 2pm     Mon – Fri ** 2nd Shift     2:15pm – 10:15pm     Mon – Fri ** 3rd Shift     10:30pm – 5:45am     Mon – Fri ** ** (Possible weekend “mandatory” work to be determined)   — Drug and Background Check Required.   To apply, visit our website at http://www.pgkservices.net/ : — From the three line menu icon, select "Current Jobs” — From laptop or PC, scroll to bottom of page to see all current openings — From phone, select Search to see all current openings — Refer to Job Code 16-00113  

The Air Force has over 40 careers available for mechanics.  You’ll work on some of the most advanced aircraft and technological equipment in the Air Force. Military aircraft fly hundreds of missions each day and need expert servicing to remain safe and ready to fly. To keep those aircraft flying, we have a dedicated team of jet engine mechanics, hydraulic specialists, and individuals who repair airframes and flight control systems. Your role may also extend beyond the skies as an expert responsible for maintaining missile and space systems.   Job Requirements: Min. education: High School Diploma Min. experience: NO EXPERIENCE REQUIRED Competitive pay with regular raises

Performance Driven Workforce is now hiring full-time Entry Level Mechanics for an Automotive Tier 1 Supplier. This position involves working on experimental vehicle builds built with brand new parts. Building vehicles from the ground up in an indoor shop environment. This full-time Entry Level Mechanics position based out of Livonia, MI and offers AM Day shifts, PM Night shifts and Overtime. Candidates meeting the requirements for this Entry Level Mechanics Position below are strongly encouraged to apply. Day shifts, Night shifts and Overtime Shifts are available.  Retirees and veterans are welcome.  If you have experience from the following fields you may qualify for this position: Mechanic, Technician, Service Technician, Service Mechanic, Wheeled Vehicle Mechanic, Repair Techs, Salvage Yard Worker, Collision Repair Tech, Auto Body Tech, Certified Master Mechanic, Trailer Mechanic, Heavy Duty Mechanic, Diesel Mechanic, R/R Mechanic, Express Tech, Dealership Tech, Quick Lube, Quick Lube Tech, Lube Technician, Express Technician, Service, Automotive, Auto, Service Tech, Auto Tech, Auto Service Tech, Shop Mechanic, Restoration Mechanic, Boat Mechanic, Aircraft Mechanic, Fleet Mechanic, Prototype Mechanic, Journeyman Electrician, Maintenance and Repair Workers, General Elevator Installers and Repairers, Mobile Heavy Equipment Mechanics, (HVAC) Heating and Air Conditioning Mechanics and Refrigeration Mechanics, and Installers. AM Day shift: 6:00 am to 2:30 pm or 4:30 pm (Monday – Saturday, + Possible Mandatory OT) PM Night shift: 3:15 pm to 12:00 am or 2:30 am (Monday – Saturday, + Possible Mandatory OT) Entry Level Mechanics earn: $12 to $15/hr. (Depending On Experience)     Employment Advantages:                                                                                                                                                                                      Unlimited Overtime Work on Cutting Edge Vehicles Paid Weekly     Requirements : High school diploma or equivalent. Must be willing to work a minimum of 60+ hours a week. Minimum 1 years' automotive technician experience or equivalent military experience. Knowledge of proper installation/disassembly of parts on newer model vehicles. Must have own tools with a rolling toolbox. (TOOLBOX PURCHASING PROGRAM AVAILABLE!) Possess the skills to follow any procedures or work instructions provided for assigned projects, such as work requests, shop procedures and/or shop manuals, publications or schematic diagrams. Possess the skills to work in a team atmosphere & learn new tasks as an Automotive Technician. Have the skills & desire to complete all tasks assigned. Have excellent communication & time management skills. Have reliable attendance & be able to work overtime/weekends. Must have good attention to detail.  Preferred Skills: Knowledge of Ford products a plus. ASE /State certifications a plus. Prototype build mechanic experience a plus   Benefits: Unlimited Overtime When Available Overtime Rate up to $28.50/hr. Tool Buying Assistance No Certification Required Veteran Friendly Employer We offer Medical, Dental, Vision, Short Term Disability, Life Insurance after your 60 days with Performance Driven Workforce.  Work With Latest Automotive Technology  Performance Driven Workforce is an Equal Opportunity Employer.   Apply on-line at www.pdworkforce or call (313) 203-9151 Veteran-Friendly Employer Equal Employment Opportunity

General Labor, Production, $11.00 and up.  All 3 shifts.  May require lifting.  Temporary to hire opportunities.  Increases upon hire.  Opportunities to move up in the company.  On the job training! No experience required. Job Requirements: Education HS Diploma/GED Work Experience None required Certifications/Degree None required

Positions Available: Car Wash Attendant Shipping and Receiving CNC Welding Assembly Learn and Understand Assembly instructions using personal training, work orders, part lists, blueprints and manuals. Accurately complete work order and pick lists forms to track inventory Keep work area, parts, supplies and tools organized. Request repairs and replacement of supplies as needed. Maintain strict shift attendance compliance Work in a healthy team environment, assist others when able and needed. Requirements: High school diploma or GED Ability to efficiently use a variety of mechanical hand tools, cordless and pneumatic drills and drivers, wrenches, measuring devises, testing devices, manual lifts etc. Basic math skills for sue of measuring and inspection tools Ability to work on your feet all day, moving continuously and lifting up to 50 lbs. Basic computer skills over time and weekend work sometimes required.

Underground Contractors, Incorporated is seeking a full-time Automotive/Diesel/Heavy Equipment, and Shop/Field Mechanic to support our location in Wixom, Michigan. Essential Duties and Qualifications include: Must be able to diagnose and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, and braking Possess ability to work well in a fast-paced environment and be quick to learn Able to work as part of a team Candidates should be able to work long hours including Saturdays. Ideal candidates will possess a minimum of 5 years hands-on equipment repair experience and/or an equivalent mixture of education and experience High School diploma or equivalent is required, and qualified training repairing heavy equipment is a plus   Additional Requirements: Mechanics must provide their own tools A valid driver license with an excellent driving history Ability to occasionally lift 50 lbs. Occasional overnight travel may be required CDL-A is a plus   Wage range is $17-$23 per hour, depending on experience All Candidates are subject to pre-placement drug screening and criminal background check. UCI offers a competitive comprehensive compensation, including: Company cell phone Company vehicle for field work Benefits package including Medical, Dental, 401k retirement plan, paid sick time, paid vacation time and paid Holidays upon completion of applicable eligibility periods. Equal Opportunity Employer

Underground Contractors, Inc is seeking candidates for General Labor positions to be a part of our Wixom, Michigan team.  These positions are full-time, entry level, which require good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position may operate a variety of hand and power tools, clean and prepare job sites, dig trenches, set braces to support the sides of excavations, clean up rubble and debris, remove waste materials, and carry materials/supplies from trucks to job site so they are ready for installation or other tasks as assigned.   Essential Duties and Responsibilities include: Perform all duties assigned by the Foreman and follow instructions to ensure safety of entire team. High school diploma/GED preferred Ability to work with a team is essential Able to work on foot for extended periods of time Ability to work in all weather conditions Reliable mode of transportation required Experience on a construction crew preferred but not required   Additional Requirements: Ability to occasionally lift 50 lbs. Occasional overnight travel may be required CDL-A is a plus   Wage range is $12 - $16 per hour, depending on experience.   All Candidates are subject to pre-placement drug screening and criminal background check.    UCI offers a competitive comprehensive compensation, including: Benefits package including Medical, Dental, 401k retirement plan, paid sick time, paid vacation time and paid Holidays upon completion of applicable eligibility periods.   Equal Opportunity Employer

General Labor We are seeking a General Laborer to join our team! You will run a mill and drill press, paint and package parts, and perform other tasks to support a manufacturing environment. Experience is not needed. If you are reliable and want to learn, we will train you. General Labor Job Duties and Responsibilities This team member is an integral part of our office. We want a problem solver who can complete projects in a timely manner. Other duties include: Operating a drill press Operating a manual milling machine Painting and packaging parts Leak testing parts Follow project instructions from shop manager Complete all assigned tasks efficiently and on time Other duties in the shop as assigned General Labor Qualifications You will need to bring these qualities to be successful in this role Outstanding communicator, both orally and written Excellent customer service skills Self-starter who works well independently Ability to prioritize given tasks and work efficiently towards completing them Detail-oriented Strong problem solver and analytical thinker Ability to follow project instructions Ability to follow all health and safety regulations when operating equipment   General Labor Requirements and Qualifications To be considered for this position, you must have the following: Minimum education - High School Diploma or equivalent Must have citizenship or lawful permanent residency 1 year of prior production experience Must be able to be on your feet for 8 hours Must be comfortable working in a fast-paced environment Must be able to work independently and as part of a team Must have strong attention to detail Must have a positive attitude and strong work ethic

LGC Hospitality is currently looking for an experienced individual who has Hospital Cleaning experience in a hospital setting in the Commerce, Walled Lake and Novi area. We are looking to fill Full and Part time positions! Pay is weekly! Job Duties: You would be responsible for providing a clean environment for all patient's and employees. Prospective applicants will also be responsible for performing daily cleaning tasks as assigned and general floor work. Push/pull carts, lift/move some furniture and reading a board. Complete final breakdown of function, by cleaning the room, and cleaning and returning equipment to its proper location. Transport dirty linen to correct area to be cleaned. Maintain cleanliness of work areas throughout the day. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work. Requirements: Must have a clean criminal background. No felonies will be accepted. Must have previous hospital cleaning experience. Should be able to work around bodily fluids, including blood, feces, urine, and vomit. Must have or obtain TB test, MMR, and high school diploma/GED

JOB TITLE :              General Maintenance & Grounds   JOB SUMMARY:     Performs minor and major repairs of all buildings and equipment.  Performs landscaping and ground maintenance. Position is Monday-Friday Actively support the mission of DM Burr by working to ensure quality service and professionalism.  PRIMARY RESPONSIBILITIES:      Performs Complete tasks of all service requests, maintenance, and preventive equipment inspections. Establish and monitor preventive maintenance procedures for assigned facility. Researches and resolves problems related to facilities operational and maintenance issues. Maintain an up-to-date inventory of all equipment, tools and supplies needed to perform maintenance and grounds functions. Repairs partitions, doors, windows, floor, furniture, and building framework, as assigned. Maintains facility grounds, which includes cutting grass, cleaning the yard, trimming shrubbery, raking, planting, and weeding.  Cleans parking lots and driveways.  Removes snow from sidewalks and driveways and spreads sand, salt or ashes to prevent slipping. Follow all safety standards as outlined in company policy and OSHA regulations. Additional duties as assigned or needed.   SKILLS/QUALIFICATIONS: Education: High school diploma, GED or technical school certification Must be self-motivated and have the ability to work with minimal supervision. Key Maintenance experience required: Grounds. Maintain a positive attitude which supports team performance and productivity. Valid driver’s license required (no restrictions). Must have team aptitude and approach.

To connect with a recruiter on Driver and Technician careers, text "ADS" to 44844 POSITION SUMMARY : Seeking a Heavy Duty Truck Technician / Mechanic to perform preventive maintenance and scheduled maintenance repairs in compliance with DOT and Safety policies.   Essential Functions: Utilize Driver Vehicle Inspection Reports (DVIR's) to diagnose electrical, hydraulic, suspension, brake and air systems on vehicles Comfortability with vehicle diagnostic software/systems to interpret failure modes to initiate or assign repairs Performs repairs and assigned preventive maintenance services Performs service calls for emergency breakdowns Complete required paperwork for tracking repairs on vehicles, documenting parts usage, and accounting for repair times Maintains a clean, safe work area in compliance with Corporate / OSHA Standards Performs all work in accordance with established safety procedures   Special Skills, Education or Licensure Required: Minimum of two (2) years of experience in automotive/truck, light or heavy equipment maintenance and repair   OR   completion of accredited vocational technical school program Proficiency in vehicle and equipment diagnosis and repair Working knowledge of fuel, ignition, cooling, mechanical, hydraulic, electrical and air brake systems Knowledge of safety procedures and practices necessary while operating or repairing vehicles and equipment Skill in operating tools equipment, parts and procedures utilized during the repair and servicing of vehicles and equipment Ability to effectively communicate needed repairs or tasks Ability to read and comprehend service and technical information   Licenses, Certifications, Registrations Vehicle driver's license Ability to obtain Air Brake Inspector Certification   Preferred Qualifications:  Ability to obtain a CDL License for certain locations.   Physical Demands and Work Environment Work is performed in an open automotive shop environment. Incumbents are exposed to the elements, the noise of machinery and vehicles, fumes, exhaust emissions, grease, engine oils, solvents, chemicals, dust, electrical hazards, mechanical hazards, vehicle hazards and vibrations. Incumbents stand and walk on level and uneven surfaces, twist, bend, push, pull, crouch, climb stairs, reach, bend and crawl, grasp, drag, lift and carry items weighing 50 pounds or less. Incumbents may work above shoulder level with power and /or hand tools weighing 15 pounds or less and in confined spaces. Incumbents must be able to meet the physical requirements of the positions and have mobility, vision, and hearing, sense of smell and dexterity levels appropriate to the duties to be performed. All qualified applicants considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation or other protected status.  

Taking care of our customers, while they take care of their business!  About DM Burr:  What started as a family-owned and operated cleaning business, over the past 2 decades, DM Burr has grown to become one of the largest, privately owned building maintenance providers serving the Midwest! With over 1,000 team members throughout Michigan, DM Burr services a variety of areas, such as schools, government and public facilities, manufacturing plants, financial institutions, retail centers and more!  Position Available: Part Time, 2nd Shift Custodian   Benefits Offered [Part-Time]: Consistent Work Schedules  Company Paid Uniforms Company Provided Training Primary Responsibilities: Use approved methods and materials in cleaning and caring for assigned facility Dusting, vacuuming, sweeping and mopping Operate floor equipment such as; auto floor scrubbers and vacuums Empty trash receptacles General cleaning of furniture, windows, window sills, and walls Stocking restrooms, janitorial closets and break rooms Setting up and cleaning up after scheduled events Light building maintenance General snow removal/lawn care as needed Position Requirements: 1-6 months custodial/ janitorial experience. Ability to stand for long periods of time. Ability to lift up to 40 lbs. Ability to follow basic verbal and written instructions Ability to work with minimal supervision Ability to pass a criminal background check 

Taking care of our customers, while they take care of their business!  About DM Burr:  What started as a family-owned and operated cleaning business, over the past 2 decades, DM Burr has grown to become one of the largest, privately owned building maintenance providers serving the Midwest! With over 1,000 team members throughout Michigan, DM Burr services a variety of areas, such as schools, government and public facilities, manufacturing plants, financial institutions, retail centers and more!  Position Available:  Full Time, 2nd Shift Custodian working Monday-Friday, 2:30pm-11pm.  Benefits Offered [Full time]: $200 hiring bonus after 90 days of employment Medical, Dental and Vision Insurance Short/Long Term Disability Life Insurance 401(k) Paid Vacation Paid Holiday Consistent Work Schedules  Company Paid Uniforms Company Provided Training Primary Responsibilities: Use approved methods and materials in cleaning and caring for assigned facility Dusting, vacuuming, sweeping and mopping Operate floor equipment such as; auto floor scrubbers and vacuums Empty trash receptacles General cleaning of furniture, windows, window sills, and walls Stocking restrooms, janitorial closets and break rooms Setting up and cleaning up after scheduled events Light building maintenance General snow removal/lawn care as needed Position Requirements: 1-6 months custodial/ janitorial experience. Ability to stand for long periods of time. Ability to lift up to 40 lbs. Ability to follow basic verbal and written instructions Ability to work with minimal supervision Ability to pass a criminal background check 

Taking care of our customers, while they take care of their business!    About DM Burr:  What started as a family-owned and operated cleaning business, over the past 2 decades, DM Burr has grown to become one of the largest, privately owned building maintenance providers serving the Midwest! With over 1,000 team members throughout Michigan, DM Burr services a variety of areas, such as schools, government and public facilities, manufacturing plants, financial institutions, retail centers and more!  Position Available:  Full Time,  Monday-Friday.  Benefits Offered:   $200 Hiring Bonus after 90 days Medical, Dental and Vision Insurance Short/Long Term Disability Life Insurance 401(k) Paid Vacation Paid Holiday Consistent Work Schedules  Company Paid Uniforms Company Provided Training   Primary Responsibilities: Use approved methods and materials in cleaning and caring for assigned facility Dusting, vacuuming, sweeping and mopping Operate floor equipment such as; auto floor scrubbers and vacuums Empty trash receptacles General cleaning of furniture, windows, window sills, and walls Stocking restrooms, janitorial closets and break rooms Setting up and cleaning up after scheduled events Light building maintenance General snow removal/lawn care as needed   Position Requirements: 1-6 months custodial/ janitorial experience. Ability to stand for long periods of time. Ability to lift up to 40 lbs. Ability to follow basic verbal and written instructions Ability to work with minimal supervision Ability to pass a criminal background check 

We are part of a national chain, yet a locally owned full service automotive repair facility. We offer a clean shop, uniforms at no charge, family atmosphere, competitive pay and no weekends! Training and Corporate hotline technical assistance is available.   Inspect, diagnose and repair vehicle automotive systems. Hours are 8-5 pm Monday through Friday. Compensation is based on experience. Must have a valid driver’s license. Job Requirements: Min. experience- 2-3 years, State Certification is required. Valid driver’s license is required. Work Experience – minimum of 2 years Certifications- must be State of Michigan certified. Email or Fax Your Resume:  Fax Number: 248-666-7864, Attn: Ty or Steve